Method Dashboard/Training Fundamentals/RPE, RIR and Training Intensity: Training Smart vs. Training Hard

RPE, RIR and Training Intensity: Training Smart vs. Training Hard

There is a difference between training hard and training smart. The best lifters do both. Understanding and applying RPE (Rate of Perceived Exertion), RIR (Reps In Reserve), and Percentage-Based Intensities will help you train with the right intensity every session, account for daily readiness, and build a sustainable relationship with effort over time.

What Is RPE (Rate of Perceived Exertion)?

RPE is a self-reported scale from 1-10 that quantifies how hard an effort feels. It is sometimes difficult to pinpoint depending on what we are doing. In strength training, it is most commonly applied as:

  • RPE 10: Absolute maximum effort. Could not do another rep or add any more weight.
  • RPE 9: Near maximal effort. Maybe 1-2 reps more could be done, or maybe 1-2 kg (2-5 lb) more.
  • RPE 8: Hard, but could do more.
  • RPE 7: Moderately challenging.
  • RPE 6 and below: Mildly to moderately challenging.

What Is RIR (Reps In Reserve)?

RIR is a measure of intensity relative to the maximum number of reps you could complete of that exercise at that weight. For example, if your 5-Rep Max of bench press was 100 lbs, the reps in reserve would be the difference in the amount of reps you did relative to that (100 lb 5RM minus 3 reps completed = 2 RIR).

We can also estimate RIR without formally testing it, although it is less reliable. After you complete a set you can ask yourself, "how many more reps could I have done before I could no longer do another rep with reasonably good form?" Your answer would be how many reps you have in reserve.

One drawback of estimating RIR is that it becomes harder to gauge as rep counts climb. Estimating RIR within a set of 6 is a lot more accurate than estimating a set of 20 reps, because more variables come into play, such as metabolic fatigue, breathing rate, boredom, and so on.

One very important consideration for both RPE and estimating RIR is that they are subjective measures. Therefore, it might be more valuable to do some real strength testing. This way you have a much stronger reference point for effort and intensity.

What Is Percentage-Based Training?

Percentage-based training was the dominant method of prescribing intensity in the Soviet and Eastern-bloc lifting programs developed by coaches like Zatsiorsky and Verkhoshansky. It remains common in powerlifting and Olympic weightlifting, and it's also the standard way research quantifies intensity. Simply put, you test the maximal amount of weight you can perform on a given exercise for a specified rep count (1-Rep, 3-Reps, 5-Reps), then prescribe training loads as percentages of that maximum.

Let's use the same bench press as above: 5-RM at 100 lb. Then we keep all other parameters the same (the reps) and vary the load of the exercise based on percentages: 75%, 80%, 90% of your 5-RM load. You can use this method for 1RM (1-Rep Max) tests, 3RM (3-Rep Max) tests, 8RM (8-Rep Max) tests, and so on.

Limitations of Using RPE, RIR, and Percentage-Based Intensities

Although using RPE, RIR, and percentage-based intensities is extremely helpful, they have limitations. Lack of sleep, time of day, stress levels, and a poor pre-workout meal can all skew our perception of effort and our ability to train hard. Your RMs can change day to day and week to week based on sleep quality, stress, nutrition, and fatigue. An 80% day when you are well-rested and fuelled is a very different session than 80% when you are under-slept, under-fuelled, and stressed.

The practical implication: there is no one perfect model that you can use across the board. Having more tools in your toolbox, and the more reliable those tools are, the better, because each can give you a slightly different interpretation.

How to Use RPE, RIR, and Percentage-Based Intensities in Your Training

These are the working intensity ranges I use with clients. They come from the NSCA's foundational reference textbook, Essentials of Strength Training and Conditioning (4th ed., Haff & Triplett, eds.), and are applied broadly across the strength and conditioning industry. Use them as reference points, not strict rules.

For most lifters, the working set ranges for strength and hypertrophy (4-12 reps), the intensity indicators you will want to hit are as follows:

GoalRepsIntensity Target
Strength-Focused Outcomes< 6 RepsRPE: 8-9, 1-3 RIR, 80-95% RM
Power-Focused Outcomes< 5 RepsRPE: 8-9, 1-3 RIR, 87-95% RM, at high movement velocity
Hypertrophy-Focused Outcomes6-12 RepsRPE: 6-9, 1-5 RIR, 70-85% RM
Muscle Endurance Outcomes> 12 RepsRPE: 6-9, 1-5 RIR, < 70% RM

Building Accuracy With Your Measuring Tools

A 2022 scoping review and meta-analysis by Halperin et al., in Sports Medicine, found that lifters consistently underestimate how many reps they have in reserve, by approximately one rep on average. In practical terms: when you call a set "2 reps left," you probably have closer to 3. Accuracy improves when predictions are made closer to actual failure, and when the set is in a heavier, lower-rep range (≤12 reps). Notably, training experience did not significantly improve accuracy. Even advanced lifters tend to stop short of their true capacity. Most lifters are training harder in their head than they actually are in the bar. A training log keeps you honest.

How to Calibrate the Scale

In my coaching practice, we take one set of one of your main exercises (bench, squat, or deadlift) to true technical failure, the rep where the bar stops moving with clean form. Compare how that felt to your last self-reported RPE 9 on the same lift at the same weight. Most lifters find they have been calling RPE 7 what is actually RPE 8+. A calibration set at the end of each training block is usually enough to keep your perceived exertion honest. Newer lifters whose strength is shifting quickly may benefit from recalibrating every couple of weeks. For most intermediate lifters, even a 5-pound gain within a block is a marginal shift in percentage-based intensity. You don't need to recalibrate constantly.

The Bottom Line

There is no single best method of measuring training intensity. Strength testing helps because it gives us a baseline from which to compare progress and to work from. Best practice is to assess your daily readiness and use your warm-up sets as a gauge for determining where things are at before you really start to load the bar. If you are being smart and using these tools effectively, you will be able to train hard when you are ready, pull back when you are not, and build a sustainable intensity over the long term.

Accurate testing, honest self-assessment, and experience are required to apply these tools well. If you want it implemented correctly from day one, that is a coaching conversation.

Questions about intensity or programming? Reach out directly. → mpstrength.com/contact


For the Curious: The Research Behind This Article

  • Halperin I, Malleron T, Har-Nir I, Androulakis-Korakakis P, Wolf M, Fisher J, Steele J. "Accuracy in Predicting Repetitions to Task Failure in Resistance Exercise: A Scoping Review and Exploratory Meta-analysis." Sports Medicine, 2022.
  • Haff GG, Triplett NT (eds.). Essentials of Strength Training and Conditioning, 4th edition. Human Kinetics, 2016. (NSCA's foundational reference textbook.)

Ready to Start Training?

Put this knowledge into practice with structured coaching.

Want to know where your own training actually stands? Take the Training Reality Check.

Take the Reality Check